-* 镜像地址:
+* 镜像地址:
使用方法：在 `/etc/pacman.conf` 文件末尾添加以下两行：
```
[archlinuxcn]
-Server = https://mirrors.tuna.tsinghua.edu.cn/archlinuxcn/$arch
+Server = https://{{ site.host }}/archlinuxcn/$arch
```
之后安装 `archlinuxcn-keyring` 包导入 GPG key。
diff --git a/_posts/help/1970-01-01-bananian.md b/_posts/help/1970-01-01-bananian.md
index 0f8ad1f..e613073 100644
--- a/_posts/help/1970-01-01-bananian.md
+++ b/_posts/help/1970-01-01-bananian.md
@@ -9,7 +9,7 @@ mirrorid: bananian
[Bananian](https://www.bananian.org/) 是为 [Banana Pi](http://www.banana-pi.org/) 制作的，基于官方 Debian 仓库的发行版，
其内核和 bootloader 为 Banana Pi 做了定制化。
-安装镜像可以到 获取。
+安装镜像可以到 获取。
### 使用 TUNA 镜像作为软件仓库
@@ -37,19 +37,19 @@ gpg --armor --export 24BFF712 | sudo apt-key add -
{% endraw %}
diff --git a/_posts/help/1970-01-01-binutils-gdb.git.md b/_posts/help/1970-01-01-binutils-gdb.git.md
index 17098ee..caade9a 100644
--- a/_posts/help/1970-01-01-binutils-gdb.git.md
+++ b/_posts/help/1970-01-01-binutils-gdb.git.md
@@ -9,19 +9,19 @@ mirrorid: binutils-gdb.git
如需克隆 Binutils 等项目的代码，使用
```
-git clone https://mirrors.tuna.tsinghua.edu.cn/git/binutils-gdb.git
+git clone https://{{ site.host }}/git/binutils-gdb.git
```
若要将 tuna mirror 加入已有代码库，可在已有仓库中运行
```
-git remote add tuna https://mirrors.tuna.tsinghua.edu.cn/git/binutils-gdb.git
+git remote add tuna https://{{ site.host }}/git/binutils-gdb.git
```
或运行
```
-git remote set-url origin https://mirrors.tuna.tsinghua.edu.cn/git/binutils-gdb.git
+git remote set-url origin https://{{ site.host }}/git/binutils-gdb.git
```
将默认上游设置为 TUNA 镜像
diff --git a/_posts/help/1970-01-01-centos.md b/_posts/help/1970-01-01-centos.md
index b22462c..2f150d5 100644
--- a/_posts/help/1970-01-01-centos.md
+++ b/_posts/help/1970-01-01-centos.md
@@ -12,7 +12,7 @@ mirrorid: centos
sudo mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.bak
```
-然后编辑 /etc/yum.repos.d/CentOS-Base.repo 文件，在 `mirrorlist=` 开头行前面加 `#` 注释掉；并将 `baseurl=` 开头行取消注释（如果被注释的话），把该行内的域名（例如`mirror.centos.org`）替换为 `mirrors.tuna.tsinghua.edu.cn`。
+然后编辑 /etc/yum.repos.d/CentOS-Base.repo 文件，在 `mirrorlist=` 开头行前面加 `#` 注释掉；并将 `baseurl=` 开头行取消注释（如果被注释的话），把该行内的域名（例如`mirror.centos.org`）替换为 `{{ site.host }}`。
或者，你也可以直接使用如下内容覆盖掉 /etc/yum.repos.d/CentOS-Base.repo 文件：（未经充分测试）
@@ -45,7 +45,7 @@ sudo mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.bak
{{if release_name|between>5>7}}
[base]
name=CentOS-$releasever - Base
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/os/$basearch/
+baseurl=https://{{ site.host }}/centos/$releasever/os/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
enabled=1
gpgcheck=1
@@ -54,7 +54,7 @@ gpgkey=file:///etc/pki/rpm-gpg/{{release_security}}
#released updates
[updates]
name=CentOS-$releasever - Updates
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/updates/$basearch/
+baseurl=https://{{ site.host }}/centos/$releasever/updates/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
enabled=1
gpgcheck=1
@@ -63,7 +63,7 @@ gpgkey=file:///etc/pki/rpm-gpg/{{release_security}}
{{if release_name|equals>8}}
[Base OS]
name=CentOS-$releasever - Base
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/BaseOS/$basearch/os/
+baseurl=https://{{ site.host }}/centos/$releasever/BaseOS/$basearch/os/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=BaseOS&infra=$infra
enabled=1
gpgcheck=1
@@ -71,7 +71,7 @@ gpgkey=file:///etc/pki/rpm-gpg/{{release_security}}
[AppStream]
name=CentOS-$releasever - AppStream
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/AppStream/$basearch/os/
+baseurl=https://{{ site.host }}/centos/$releasever/AppStream/$basearch/os/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=AppStream&infra=$infra
enabled=1
gpgcheck=1
@@ -79,7 +79,7 @@ gpgkey=file:///etc/pki/rpm-gpg/{{release_security}}
[PowerTools]
name=CentOS-$releasever - PowerTools
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/PowerTools/$basearch/os/
+baseurl=https://{{ site.host }}/centos/$releasever/PowerTools/$basearch/os/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=PowerTools&infra=$infra
enabled=0
gpgcheck=1
@@ -89,7 +89,7 @@ gpgkey=file:///etc/pki/rpm-gpg/{{release_security}}
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/extras/$basearch/{{os_name}}
+baseurl=https://{{ site.host }}/centos/$releasever/extras/$basearch/{{os_name}}
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
enabled=1
gpgcheck=1
@@ -99,7 +99,7 @@ gpgkey=file:///etc/pki/rpm-gpg/{{release_security}}
#packages used/produced in the build but not released
[addons]
name=CentOS-$releasever - Addons
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/addons/$basearch/
+baseurl=https://{{ site.host }}/centos/$releasever/addons/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons
enabled=1
gpgcheck=1
@@ -109,7 +109,7 @@ gpgkey=file:///etc/pki/rpm-gpg/{{release_security}}
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/centosplus/$basearch/{{os_name}}
+baseurl=https://{{ site.host }}/centos/$releasever/centosplus/$basearch/{{os_name}}
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
gpgcheck=1
enabled=0
@@ -119,7 +119,7 @@ gpgkey=file:///etc/pki/rpm-gpg/{{release_security}}
#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/contrib/$basearch/
+baseurl=https://{{ site.host }}/centos/$releasever/contrib/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
gpgcheck=1
enabled=0
diff --git a/_posts/help/1970-01-01-chromiumos.md b/_posts/help/1970-01-01-chromiumos.md
index 1fce8b4..3b45647 100644
--- a/_posts/help/1970-01-01-chromiumos.md
+++ b/_posts/help/1970-01-01-chromiumos.md
@@ -20,7 +20,7 @@ curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo
```
-或者使用tuna的[git-repo镜像](https://mirrors.tuna.tsinghua.edu.cn/help/git-repo/)
+或者使用tuna的[git-repo镜像](https://{{ site.host }}/help/git-repo/)
#### 下载代码
@@ -34,7 +34,7 @@ cd WORKING_DIRECTORY
初始化仓库:
```
-repo init -u https://mirrors.tuna.tsinghua.edu.cn/git/chromiumos/chromiumos/manifest
+repo init -u https://{{ site.host }}/git/chromiumos/chromiumos/manifest
```
**注意: 本镜像是 Chromium OS 的 master 分支的镜像，如果使用本镜像下载 Chromium OS 的其他版本很大概率会失败**
@@ -50,7 +50,7 @@ repo init -u https://mirrors.tuna.tsinghua.edu.cn/git/chromiumos/chromiumos/mani
替换为
```
-"https://mirrors.tuna.tsinghua.edu.cn/git/chromiumos/"
+"https://{{ site.host }}/git/chromiumos/"
```
接着将
diff --git a/_posts/help/1970-01-01-clickhouse.md b/_posts/help/1970-01-01-clickhouse.md
index da491d9..7af1b3b 100644
--- a/_posts/help/1970-01-01-clickhouse.md
+++ b/_posts/help/1970-01-01-clickhouse.md
@@ -13,7 +13,7 @@ mirrorid: clickhouse
新建 `/etc/apt/sources.list.d/clickhouse.list`，内容为
```
-deb https://mirrors.tuna.tsinghua.edu.cn/clickhouse/deb/stable/ main/
+deb https://{{ site.host }}/clickhouse/deb/stable/ main/
```
@@ -24,6 +24,6 @@ deb https://mirrors.tuna.tsinghua.edu.cn/clickhouse/deb/stable/ main/
```
[repo.yandex.ru_clickhouse_rpm_stable_x86_64]
name=clickhouse stable
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/clickhouse/rpm/stable/x86_64
+baseurl=https://{{ site.host }}/clickhouse/rpm/stable/x86_64
enabled=1
```
diff --git a/_posts/help/1970-01-01-crates.io-index.git.md b/_posts/help/1970-01-01-crates.io-index.git.md
index e0d4358..f226563 100644
--- a/_posts/help/1970-01-01-crates.io-index.git.md
+++ b/_posts/help/1970-01-01-crates.io-index.git.md
@@ -13,7 +13,7 @@ mirrorid: crates.io-index.git
replace-with = 'tuna'
[source.tuna]
-registry = "https://mirrors.tuna.tsinghua.edu.cn/git/crates.io-index.git"
+registry = "https://{{ site.host }}/git/crates.io-index.git"
```
该镜像可加快 cargo 读取软件包索引的速度。
diff --git a/_posts/help/1970-01-01-cygwin.md b/_posts/help/1970-01-01-cygwin.md
index 41f37e1..25bd966 100644
--- a/_posts/help/1970-01-01-cygwin.md
+++ b/_posts/help/1970-01-01-cygwin.md
@@ -12,10 +12,10 @@ Cygwin 镜像使用帮助
选择`Install from Internet`, 在"User URL"处输入以下地址：
```
-https://mirrors.tuna.tsinghua.edu.cn/cygwin/
+https://{{ site.host }}/cygwin/
```
-点击"Add"按钮, 然后选中"https://mirrors.tuna.tsinghua.edu.cn", 点击"下一步"进行安装。
+点击"Add"按钮, 然后选中"https://{{ site.host }}", 点击"下一步"进行安装。
注意，该列表为可多选列表，注意把上面不需要的镜像点掉。
diff --git a/_posts/help/1970-01-01-debian.md b/_posts/help/1970-01-01-debian.md
index 93e9418..6f37ed7 100644
--- a/_posts/help/1970-01-01-debian.md
+++ b/_posts/help/1970-01-01-debian.md
@@ -37,14 +37,14 @@ $ sudo apt install apt-transport-https
{% raw %}
diff --git a/_posts/help/1970-01-01-docker-ce.md b/_posts/help/1970-01-01-docker-ce.md
index c137de1..9a98239 100644
--- a/_posts/help/1970-01-01-docker-ce.md
+++ b/_posts/help/1970-01-01-docker-ce.md
@@ -51,7 +51,7 @@ sudo apt-get install apt-transport-https ca-certificates curl gnupg2 software-pr
sudo add-apt-repository \
- "deb [arch=amd64] https://mirrors.tuna.tsinghua.edu.cn/docker-ce/linux/{{deb_release}} \
+ "deb [arch=amd64] https://{{ site.host }}/docker-ce/linux/{{deb_release}} \
$(lsb_release -cs) \
stable"
@@ -63,7 +63,7 @@ sudo apt-get install apt-transport-https ca-certificates curl gnupg2 software-pr
{% raw %}
-echo "deb [arch=armhf] https://mirrors.tuna.tsinghua.edu.cn/docker-ce/linux/{{deb_release}} \
+echo "deb [arch=armhf] https://{{ site.host }}/docker-ce/linux/{{deb_release}} \
$(lsb_release -cs) stable" | \
sudo tee /etc/apt/sources.list.d/docker.list
@@ -112,7 +112,7 @@ sudo yum install -y yum-utils device-mapper-persistent-data lvm2
把软件仓库地址替换为 TUNA:
```bash
-sudo sed -i 's+download.docker.com+mirrors.tuna.tsinghua.edu.cn/docker-ce+' /etc/yum.repos.d/docker-ce.repo
+sudo sed -i 's+download.docker.com+{{ site.host }}/docker-ce+' /etc/yum.repos.d/docker-ce.repo
```
最后安装:
diff --git a/_posts/help/1970-01-01-elpa.md b/_posts/help/1970-01-01-elpa.md
index de90bbe..da9161c 100644
--- a/_posts/help/1970-01-01-elpa.md
+++ b/_posts/help/1970-01-01-elpa.md
@@ -11,18 +11,18 @@ ELPA 是 Emacs 内建包管理器 `package.el` 的软件源，本镜像支持了
| ELPA | 镜像地址 |
|-------------------|---------------------------------------------|
-| [GNU ELPA](http://elpa.gnu.org/) | http://mirrors.tuna.tsinghua.edu.cn/elpa/gnu/ |
-| [MELPA](https://melpa.org/) | http://mirrors.tuna.tsinghua.edu.cn/elpa/melpa/ |
-| [MELPA Stable](http://stable.melpa.org/#/) | http://mirrors.tuna.tsinghua.edu.cn/elpa/melpa-stable/ |
-| [Marmalade](https://marmalade-repo.org/) | http://mirrors.tuna.tsinghua.edu.cn/elpa/marmalade/ |
-| [Org](http://orgmode.org/elpa.html) | http://mirrors.tuna.tsinghua.edu.cn/elpa/org/ |
+| [GNU ELPA](http://elpa.gnu.org/) | http://{{ site.host }}/elpa/gnu/ |
+| [MELPA](https://melpa.org/) | http://{{ site.host }}/elpa/melpa/ |
+| [MELPA Stable](http://stable.melpa.org/#/) | http://{{ site.host }}/elpa/melpa-stable/ |
+| [Marmalade](https://marmalade-repo.org/) | http://{{ site.host }}/elpa/marmalade/ |
+| [Org](http://orgmode.org/elpa.html) | http://{{ site.host }}/elpa/org/ |
根据你的需求，设置 package-archives ，比如用 GNU ELPA 和 MELPA：
```lisp
-(setq package-archives '(("gnu" . "http://mirrors.tuna.tsinghua.edu.cn/elpa/gnu/")
- ("melpa" . "http://mirrors.tuna.tsinghua.edu.cn/elpa/melpa/")))
+(setq package-archives '(("gnu" . "http://{{ site.host }}/elpa/gnu/")
+ ("melpa" . "http://{{ site.host }}/elpa/melpa/")))
(package-initialize) ;; You might already have this line
```
@@ -36,9 +36,9 @@ Spacemacs 用户
```lisp
(setq configuration-layer--elpa-archives
- '(("melpa-cn" . "http://mirrors.tuna.tsinghua.edu.cn/elpa/melpa/")
- ("org-cn" . "http://mirrors.tuna.tsinghua.edu.cn/elpa/org/")
- ("gnu-cn" . "http://mirrors.tuna.tsinghua.edu.cn/elpa/gnu/")))
+ '(("melpa-cn" . "http://{{ site.host }}/elpa/melpa/")
+ ("org-cn" . "http://{{ site.host }}/elpa/org/")
+ ("gnu-cn" . "http://{{ site.host }}/elpa/gnu/")))
```
### develop 分支
@@ -46,9 +46,9 @@ Spacemacs 用户
```lisp
(setq configuration-layer-elpa-archives
- '(("melpa-cn" . "http://mirrors.tuna.tsinghua.edu.cn/elpa/melpa/")
- ("org-cn" . "http://mirrors.tuna.tsinghua.edu.cn/elpa/org/")
- ("gnu-cn" . "http://mirrors.tuna.tsinghua.edu.cn/elpa/gnu/")))
+ '(("melpa-cn" . "http://{{ site.host }}/elpa/melpa/")
+ ("org-cn" . "http://{{ site.host }}/elpa/org/")
+ ("gnu-cn" . "http://{{ site.host }}/elpa/gnu/")))
```
Cask 用户
@@ -57,8 +57,8 @@ Cask 用户
[Cask](https://github.com/cask/cask) 是一个 Emacs Lisp 的项目管理工具。这里还是以 GNU ELPA 和 MELPA 为例，在添加下面的代码到 Cask
```lisp
-(source "gnu" "http://mirrors.tuna.tsinghua.edu.cn/elpa/gnu/")
-(source "melpa" "http://mirrors.tuna.tsinghua.edu.cn/elpa/melpa/")
+(source "gnu" "http://{{ site.host }}/elpa/gnu/")
+(source "melpa" "http://{{ site.host }}/elpa/melpa/")
```
关于 ELPA 的选择
@@ -86,10 +86,10 @@ URL Bug
事实上，末尾没有`/`的话，emacs会去尝试取以下链接:
- -
+ -
而正常的链接应该是
- -
+ -
这个是emacs自己的bug。在 中有描述。
diff --git a/_posts/help/1970-01-01-epel.md b/_posts/help/1970-01-01-epel.md
index e4f198e..9ed3454 100644
--- a/_posts/help/1970-01-01-epel.md
+++ b/_posts/help/1970-01-01-epel.md
@@ -12,7 +12,7 @@ EPEL(Extra Packages for Enterprise Linux)是由Fedora Special Interest Group维
下面以CentOS 7为例讲解如何使用tuna的epel镜像。
-首先从CentOS Extras这个源（[tuna](https://mirrors.tuna.tsinghua.edu.cn/help/centos)也有镜像）里安装epel-release：
+首先从CentOS Extras这个源（[tuna](https://{{ site.host }}/help/centos)也有镜像）里安装epel-release：
```
yum install epel-release
@@ -21,14 +21,14 @@ yum install epel-release
当前tuna已经在epel的官方镜像列表里，所以不需要其他配置，mirrorlist机制就能让你的服务器就近使用tuna的镜像。如果你想强制
你的服务器使用tuna的镜像，可以修改`/etc/yum.repos.d/epel.repo`，将`mirrorlist`和`metalink`开头的行注释掉。
-接下来，取消注释这个文件里`baseurl`开头的行，并将其中的`http://download.fedoraproject.org/pub`替换成`https://mirrors.tuna.tsinghua.edu.cn`。
+接下来，取消注释这个文件里`baseurl`开头的行，并将其中的`http://download.fedoraproject.org/pub`替换成`https://{{ site.host }}`。
可以用如下命令自动替换：（来自 https://github.com/tuna/issues/issues/687）
```
sed -e 's!^metalink=!#metalink=!g' \
-e 's!^#baseurl=!baseurl=!g' \
- -e 's!//download\.fedoraproject\.org/pub!//mirrors.tuna.tsinghua.edu.cn!g' \
+ -e 's!//download\.fedoraproject\.org/pub!//{{ site.host }}!g' \
-e 's!http://mirrors\.tuna!https://mirrors.tuna!g' \
-i /etc/yum.repos.d/epel.repo /etc/yum.repos.d/epel-testing.repo
```
@@ -38,7 +38,7 @@ sed -e 's!^metalink=!#metalink=!g' \
```
[epel]
name=Extra Packages for Enterprise Linux 7 - $basearch
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/epel/7/$basearch
+baseurl=https://{{ site.host }}/epel/7/$basearch
#mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=$basearch
failovermethod=priority
enabled=1
@@ -47,7 +47,7 @@ gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7
[epel-debuginfo]
name=Extra Packages for Enterprise Linux 7 - $basearch - Debug
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/epel/7/$basearch/debug
+baseurl=https://{{ site.host }}/epel/7/$basearch/debug
#mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-debug-7&arch=$basearch
failovermethod=priority
enabled=0
@@ -56,7 +56,7 @@ gpgcheck=1
[epel-source]
name=Extra Packages for Enterprise Linux 7 - $basearch - Source
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/epel/7/SRPMS
+baseurl=https://{{ site.host }}/epel/7/SRPMS
#mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-source-7&arch=$basearch
failovermethod=priority
enabled=0
diff --git a/_posts/help/1970-01-01-fdroid.md b/_posts/help/1970-01-01-fdroid.md
index 86995c5..e8e98a4 100644
--- a/_posts/help/1970-01-01-fdroid.md
+++ b/_posts/help/1970-01-01-fdroid.md
@@ -8,10 +8,10 @@ mirrorid: fdroid
用 F-Droid 客户端打开此链接：
-https://mirrors.tuna.tsinghua.edu.cn/fdroid/repo/?fingerprint=43238D512C1E5EB2D6569F4A3AFBF5523418B82E0A3ED1552770ABB9A9C9CCAB
+https://{{ site.host }}/fdroid/repo/?fingerprint=43238D512C1E5EB2D6569F4A3AFBF5523418B82E0A3ED1552770ABB9A9C9CCAB
或复制此链接后在客户端中添加存储库，可以将此镜像添加为用户镜像。
如果需要添加 Archive 库，可以使用如下链接：
-https://mirrors.tuna.tsinghua.edu.cn/fdroid/archive?fingerprint=43238D512C1E5EB2D6569F4A3AFBF5523418B82E0A3ED1552770ABB9A9C9CCAB
\ No newline at end of file
+https://{{ site.host }}/fdroid/archive?fingerprint=43238D512C1E5EB2D6569F4A3AFBF5523418B82E0A3ED1552770ABB9A9C9CCAB
diff --git a/_posts/help/1970-01-01-fedora.md b/_posts/help/1970-01-01-fedora.md
index ae1dccc..b4902fd 100644
--- a/_posts/help/1970-01-01-fedora.md
+++ b/_posts/help/1970-01-01-fedora.md
@@ -26,7 +26,7 @@ Fedora 29 及更旧版本已不再受官方支持，Fedora 官方已将 Fedora 2
[fedora]
name=Fedora $releasever - $basearch
failovermethod=priority
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/fedora/releases/$releasever/Everything/$basearch/os/
+baseurl=https://{{ site.host }}/fedora/releases/$releasever/Everything/$basearch/os/
metadata_expire=28d
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
@@ -39,7 +39,7 @@ skip_if_unavailable=False
[updates]
name=Fedora $releasever - $basearch - Updates
failovermethod=priority
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/fedora/updates/$releasever/Everything/$basearch/
+baseurl=https://{{ site.host }}/fedora/updates/$releasever/Everything/$basearch/
enabled=1
gpgcheck=1
metadata_expire=6h
@@ -53,7 +53,7 @@ skip_if_unavailable=False
[fedora-modular]
name=Fedora Modular $releasever - $basearch
failovermethod=priority
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/fedora/releases/$releasever/Modular/$basearch/os/
+baseurl=https://{{ site.host }}/fedora/releases/$releasever/Modular/$basearch/os/
enabled=1
metadata_expire=7d
gpgcheck=1
@@ -67,7 +67,7 @@ skip_if_unavailable=False
[updates-modular]
name=Fedora Modular $releasever - $basearch - Updates
failovermethod=priority
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/fedora/updates/$releasever/Modular/$basearch/
+baseurl=https://{{ site.host }}/fedora/updates/$releasever/Modular/$basearch/
enabled=1
gpgcheck=1
metadata_expire=6h
diff --git a/_posts/help/1970-01-01-gcc.git.md b/_posts/help/1970-01-01-gcc.git.md
index 6b54da8..605a8b5 100644
--- a/_posts/help/1970-01-01-gcc.git.md
+++ b/_posts/help/1970-01-01-gcc.git.md
@@ -9,19 +9,19 @@ mirrorid: gcc.git
如需克隆 GCC 代码，使用
```
-git clone https://mirrors.tuna.tsinghua.edu.cn/git/gcc.git
+git clone https://{{ site.host }}/git/gcc.git
```
若要将 tuna mirror 加入已有代码库，可在已有仓库中运行
```
-git remote add tuna https://mirrors.tuna.tsinghua.edu.cn/git/gcc.git
+git remote add tuna https://{{ site.host }}/git/gcc.git
```
或运行
```
-git remote set-url origin https://mirrors.tuna.tsinghua.edu.cn/git/gcc.git
+git remote set-url origin https://{{ site.host }}/git/gcc.git
```
将默认上游设置为 TUNA 镜像
diff --git a/_posts/help/1970-01-01-git-repo.md b/_posts/help/1970-01-01-git-repo.md
index 981819c..e184b0c 100644
--- a/_posts/help/1970-01-01-git-repo.md
+++ b/_posts/help/1970-01-01-git-repo.md
@@ -13,7 +13,7 @@ mirrorid: git-repo
### 下载
```
-curl https://mirrors.tuna.tsinghua.edu.cn/git/git-repo -o repo
+curl https://{{ site.host }}/git/git-repo -o repo
chmod +x repo
```
@@ -24,7 +24,7 @@ chmod +x repo
repo的运行过程中会尝试访问官方的git源更新自己，如果想使用tuna的镜像源进行更新，可以将如下内容复制到你的`~/.bashrc`里
```
-export REPO_URL='https://mirrors.tuna.tsinghua.edu.cn/git/git-repo'
+export REPO_URL='https://{{ site.host }}/git/git-repo'
```
并重启终端模拟器。
diff --git a/_posts/help/1970-01-01-gitlab-ce.md b/_posts/help/1970-01-01-gitlab-ce.md
index a8850f4..d813b3c 100644
--- a/_posts/help/1970-01-01-gitlab-ce.md
+++ b/_posts/help/1970-01-01-gitlab-ce.md
@@ -47,7 +47,7 @@ sudo apt-get install gitlab-ce
{% raw %}
{%endraw%}
@@ -60,7 +60,7 @@ deb {{if os_name|equals>ubuntu}}https{{else}}http{{/if}}://mirrors.tuna.tsinghua
```
[gitlab-ce]
name=Gitlab CE Repository
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el$releasever/
+baseurl=https://{{ site.host }}/gitlab-ce/yum/el$releasever/
gpgcheck=0
enabled=1
```
diff --git a/_posts/help/1970-01-01-gitlab-ci-multi-runner.md b/_posts/help/1970-01-01-gitlab-ci-multi-runner.md
index 5dcad69..1ba990a 100644
--- a/_posts/help/1970-01-01-gitlab-ci-multi-runner.md
+++ b/_posts/help/1970-01-01-gitlab-ci-multi-runner.md
@@ -7,7 +7,7 @@ mirrorid: gitlab-ci-multi-runner
## Gitlab CI Multi Runner 镜像使用帮助
**注意: gitlab-ci-multi-runner 镜像仅支持 x86-64 架构**，如果你需要安装版本 10 及以上的
-Runner，由于官方名称发生变化，请前往 [gitlab-runner帮助页面](https://mirrors.tuna.tsinghua.edu.cn/help/gitlab-runner/)。
+Runner，由于官方名称发生变化，请前往 [gitlab-runner帮助页面](https://{{ site.host }}/help/gitlab-runner/)。
### Debian/Ubuntu 用户
@@ -48,7 +48,7 @@ sudo apt-get install gitlab-ci-multi-runner
{% raw %}
{%endraw%}
@@ -86,7 +86,7 @@ sudo yum install gitlab-ci-multi-runner
{%endraw%}
@@ -86,7 +86,7 @@ sudo yum install gitlab-runner
{%endraw%}
@@ -47,7 +47,7 @@ deb https://mirrors.tuna.tsinghua.edu.cn/kubernetes/apt kubernetes-{{release_nam
```
[kubernetes]
name=kubernetes
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/kubernetes/yum/repos/kubernetes-el7-x86_64
+baseurl=https://{{ site.host }}/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
```
@@ -55,4 +55,4 @@ enabled=1
### Minikube
-请到 [minikube 镜像](https://mirrors.tuna.tsinghua.edu.cn/github-release/kubernetes/minikube/LatestRelease/) 下载。
+请到 [minikube 镜像](https://{{ site.host }}/github-release/kubernetes/minikube/LatestRelease/) 下载。
diff --git a/_posts/help/1970-01-01-lineage-rom.md b/_posts/help/1970-01-01-lineage-rom.md
index dcbb9de..096f2d0 100644
--- a/_posts/help/1970-01-01-lineage-rom.md
+++ b/_posts/help/1970-01-01-lineage-rom.md
@@ -13,6 +13,6 @@ Lineage OS 是全球最大的 Android 发行版之一，前身是 Cyanogenmod。
正常情况下，Lineage会根据你的地址来定向请求到最近的镜像站，因此通常情况下不需要手动选择镜像站进行下载，直接前往官方的下载网站下载即可。
-但是如果你是校内的同学，或者因为其他原因希望一定从tuna下载Lineage的rom，可以直接访问 选择设备代码及时间进行下载，或者在镜像站的主页右边或下方找到"获取下载链接"，在 操作系统 -> LineageOS 下找到最新的 rom 进行下载。
+但是如果你是校内的同学，或者因为其他原因希望一定从tuna下载Lineage的rom，可以直接访问 选择设备代码及时间进行下载，或者在镜像站的主页右边或下方找到"获取下载链接"，在 操作系统 -> LineageOS 下找到最新的 rom 进行下载。
zip文件的使用方式请参考lineage的官方文档或自行Google。
diff --git a/_posts/help/1970-01-01-lineageos.md b/_posts/help/1970-01-01-lineageos.md
index fbcb66b..81e6327 100644
--- a/_posts/help/1970-01-01-lineageos.md
+++ b/_posts/help/1970-01-01-lineageos.md
@@ -7,7 +7,7 @@ permalink: /help/lineageOS/
## lineageOS 源代码镜像使用帮助
-**注意: 本镜像是 lineageOS 源代码的镜像，如果是希望下载lineage的rom，请访问 。**
+**注意: 本镜像是 lineageOS 源代码的镜像，如果是希望下载lineage的rom，请访问 。**
### 过程摘录
@@ -20,7 +20,7 @@ curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo
```
-或者使用tuna的[git-repo镜像](https://mirrors.tuna.tsinghua.edu.cn/help/git-repo/)
+或者使用tuna的[git-repo镜像](https://{{ site.host }}/help/git-repo/)
建立工作目录:
@@ -32,7 +32,7 @@ cd WORKING_DIRECTORY
初始化仓库:
```
-repo init -u https://mirrors.tuna.tsinghua.edu.cn/git/lineageOS/LineageOS/android.git -b cm-14.1
+repo init -u https://{{ site.host }}/git/lineageOS/LineageOS/android.git -b cm-14.1
```
(如果已经有从github同步的lineageOS源代码，可以从这里直接开始）
@@ -53,7 +53,7 @@ repo init -u https://mirrors.tuna.tsinghua.edu.cn/git/lineageOS/LineageOS/androi
fetch="https://github.com/" />
```
diff --git a/_posts/help/1970-01-01-linux-firmware.git.md b/_posts/help/1970-01-01-linux-firmware.git.md
index 8f28c8f..31184cf 100644
--- a/_posts/help/1970-01-01-linux-firmware.git.md
+++ b/_posts/help/1970-01-01-linux-firmware.git.md
@@ -9,19 +9,19 @@ mirrorid: linux-firmware.git
如需克隆 Linux 固件仓库，使用
```
-git clone https://mirrors.tuna.tsinghua.edu.cn/git/linux-firmware.git
+git clone https://{{ site.host }}/git/linux-firmware.git
```
若要将 tuna mirror 加入已有仓库，可在已有仓库中运行
```
-git remote add tuna https://mirrors.tuna.tsinghua.edu.cn/git/linux-firmware.git
+git remote add tuna https://{{ site.host }}/git/linux-firmware.git
```
或运行
```
-git remote set-url origin https://mirrors.tuna.tsinghua.edu.cn/git/linux-firmware.git
+git remote set-url origin https://{{ site.host }}/git/linux-firmware.git
```
将默认上游设置为 TUNA 镜像。
diff --git a/_posts/help/1970-01-01-linux-next.git.md b/_posts/help/1970-01-01-linux-next.git.md
index b7ad7fd..da352d0 100644
--- a/_posts/help/1970-01-01-linux-next.git.md
+++ b/_posts/help/1970-01-01-linux-next.git.md
@@ -9,19 +9,19 @@ mirrorid: linux-next.git
如需克隆 linux 代码，使用
```
-git clone https://mirrors.tuna.tsinghua.edu.cn/git/linux-next.git
+git clone https://{{ site.host }}/git/linux-next.git
```
若要将 tuna mirror 加入已有代码库，可在已有仓库中运行
```
-git remote add tuna https://mirrors.tuna.tsinghua.edu.cn/git/linux-next.git
+git remote add tuna https://{{ site.host }}/git/linux-next.git
```
或运行
```
-git remote set-url origin https://mirrors.tuna.tsinghua.edu.cn/git/linux-next.git
+git remote set-url origin https://{{ site.host }}/git/linux-next.git
```
将默认上游设置为 TUNA 镜像。
diff --git a/_posts/help/1970-01-01-linux-stable.git.md b/_posts/help/1970-01-01-linux-stable.git.md
index 07b7577..01227dc 100644
--- a/_posts/help/1970-01-01-linux-stable.git.md
+++ b/_posts/help/1970-01-01-linux-stable.git.md
@@ -9,19 +9,19 @@ mirrorid: linux-stable.git
如需克隆 linux 代码，使用
```
-git clone https://mirrors.tuna.tsinghua.edu.cn/git/linux-stable.git
+git clone https://{{ site.host }}/git/linux-stable.git
```
若要将 tuna mirror 加入已有代码库，可在已有仓库中运行
```
-git remote add tuna https://mirrors.tuna.tsinghua.edu.cn/git/linux-stable.git
+git remote add tuna https://{{ site.host }}/git/linux-stable.git
```
或运行
```
-git remote set-url origin https://mirrors.tuna.tsinghua.edu.cn/git/linux-stable.git
+git remote set-url origin https://{{ site.host }}/git/linux-stable.git
```
将默认上游设置为 TUNA 镜像
diff --git a/_posts/help/1970-01-01-linux.git.md b/_posts/help/1970-01-01-linux.git.md
index e2a1ecf..9bda26e 100644
--- a/_posts/help/1970-01-01-linux.git.md
+++ b/_posts/help/1970-01-01-linux.git.md
@@ -9,19 +9,19 @@ mirrorid: linux.git
如需克隆主线 linux 代码，使用
```
-git clone https://mirrors.tuna.tsinghua.edu.cn/git/linux.git
+git clone https://{{ site.host }}/git/linux.git
```
若要将 tuna mirror 加入已有代码库，可在已有仓库中运行
```
-git remote add tuna https://mirrors.tuna.tsinghua.edu.cn/git/linux.git
+git remote add tuna https://{{ site.host }}/git/linux.git
```
或运行
```
-git remote set-url origin https://mirrors.tuna.tsinghua.edu.cn/git/linux.git
+git remote set-url origin https://{{ site.host }}/git/linux.git
```
将默认上游设置为 TUNA 镜像
@@ -31,7 +31,7 @@ git remote set-url origin https://mirrors.tuna.tsinghua.edu.cn/git/linux.git
以树莓派为例，具体操作为
```
-git clone https://mirrors.tuna.tsinghua.edu.cn/git/linux.git
+git clone https://{{ site.host }}/git/linux.git
git remote add rasp https://github.com/raspberrypi/linux.git
git fetch rasp
```
diff --git a/_posts/help/1970-01-01-linuxbrew-bottles.md b/_posts/help/1970-01-01-linuxbrew-bottles.md
index 6c6313c..af011eb 100644
--- a/_posts/help/1970-01-01-linuxbrew-bottles.md
+++ b/_posts/help/1970-01-01-linuxbrew-bottles.md
@@ -6,15 +6,15 @@ mirrorid: linuxbrew-bottles
## Linuxbrew-bottles 镜像使用帮助
-**注:该镜像是 Linuxbrew 二进制预编译包的镜像。本镜像站同时提供 Linuxbrew 的 formula 索引的镜像（即 `brew update` 时所更新内容），请参考 [Linuxbrew 镜像使用帮助](https://mirrors.tuna.tsinghua.edu.cn/help/homebrew/)。**
+**注:该镜像是 Linuxbrew 二进制预编译包的镜像。本镜像站同时提供 Linuxbrew 的 formula 索引的镜像（即 `brew update` 时所更新内容），请参考 [Linuxbrew 镜像使用帮助](https://{{ site.host }}/help/homebrew/)。**
### 临时替换
```bash
-export HOMEBREW_BOTTLE_DOMAIN=https://mirrors.tuna.tsinghua.edu.cn/linuxbrew-bottles
+export HOMEBREW_BOTTLE_DOMAIN=https://{{ site.host }}/linuxbrew-bottles
```
### 长期替换
```bash
-echo 'export HOMEBREW_BOTTLE_DOMAIN=https://mirrors.tuna.tsinghua.edu.cn/linuxbrew-bottles' >> ~/.bash_profile
+echo 'export HOMEBREW_BOTTLE_DOMAIN=https://{{ site.host }}/linuxbrew-bottles' >> ~/.bash_profile
source ~/.bash_profile
```
diff --git a/_posts/help/1970-01-01-lxc-images.md b/_posts/help/1970-01-01-lxc-images.md
index 53e1d3d..5b42a45 100644
--- a/_posts/help/1970-01-01-lxc-images.md
+++ b/_posts/help/1970-01-01-lxc-images.md
@@ -9,10 +9,10 @@ mirrorid: lxc-images
LXC 1.0 以上版本增加了 `download` 模版，支持下载定义好的系统镜像。
欲使用 TUNA 镜像进行下载加速，可以在 `lxc-create -t download` 的选项部分，
-增加 `--server mirrors.tuna.tsinghua.edu.cn/lxc-images` 即可，例如:
+增加 `--server {{ site.host }}/lxc-images` 即可，例如:
```
-# lxc-create -t download -n my-container -- --server mirrors.tuna.tsinghua.edu.cn/lxc-images
+# lxc-create -t download -n my-container -- --server {{ site.host }}/lxc-images
```
**LXD/LXC 2.0使用镜像加速的方法**:
@@ -20,6 +20,6 @@ LXC 1.0 以上版本增加了 `download` 模版，支持下载定义好的系统
创建一个remote链接，指向镜像站即可，或替换掉默认的images链接。
```
-# lxc remote add tuna-images https://mirrors.tuna.tsinghua.edu.cn/lxc-images/ --protocol=simplestreams --public
+# lxc remote add tuna-images https://{{ site.host }}/lxc-images/ --protocol=simplestreams --public
# lxc image list tuna-images:
```
diff --git a/_posts/help/1970-01-01-mariadb.md b/_posts/help/1970-01-01-mariadb.md
index 4a381f8..de09ae8 100644
--- a/_posts/help/1970-01-01-mariadb.md
+++ b/_posts/help/1970-01-01-mariadb.md
@@ -20,7 +20,7 @@ https://apt.mariadb.org/mariadb/repo
换为
```
-https://mirrors.tuna.tsinghua.edu.cn/mariadb/repo
+https://{{ site.host }}/mariadb/repo
```
### RHEL/CentOS 等基于 yum 的系统
@@ -34,5 +34,5 @@ http://yum.mariadb.org
换为
```
-https://mirrors.tuna.tsinghua.edu.cn/mariadb/yum
-```
\ No newline at end of file
+https://{{ site.host }}/mariadb/yum
+```
diff --git a/_posts/help/1970-01-01-mongodb.md b/_posts/help/1970-01-01-mongodb.md
index f66536c..e803258 100644
--- a/_posts/help/1970-01-01-mongodb.md
+++ b/_posts/help/1970-01-01-mongodb.md
@@ -38,7 +38,7 @@ sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv EA312927
{% raw %}
{%endraw%}
@@ -57,7 +57,7 @@ sudo apt-get install -y mongodb-org
```
[mongodb-org]
name=MongoDB Repository
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/mongodb/yum/el$releasever/
+baseurl=https://{{ site.host }}/mongodb/yum/el$releasever/
gpgcheck=0
enabled=1
```
diff --git a/_posts/help/1970-01-01-msys2.md b/_posts/help/1970-01-01-msys2.md
index c101af1..8a1966b 100644
--- a/_posts/help/1970-01-01-msys2.md
+++ b/_posts/help/1970-01-01-msys2.md
@@ -16,7 +16,7 @@ MSYS2 镜像使用帮助
安装
--------------
-请访问该镜像目录下的 `distrib/` 目录（[x86_64](https://mirrors.tuna.tsinghua.edu.cn/msys2/distrib/x86_64) 、[i686](https://mirrors.tuna.tsinghua.edu.cn/msys2/distrib/i686/)），找到名为 `msys2-<架构>-<日期>.exe` 的文件（如 `msys2-x86_64-20141113.exe`），下载安装即可。
+请访问该镜像目录下的 `distrib/` 目录（[x86_64](https://{{ site.host }}/msys2/distrib/x86_64) 、[i686](https://{{ site.host }}/msys2/distrib/i686/)），找到名为 `msys2-<架构>-<日期>.exe` 的文件（如 `msys2-x86_64-20141113.exe`），下载安装即可。
pacman 的配置
-------------
@@ -24,19 +24,19 @@ pacman 的配置
编辑 `/etc/pacman.d/mirrorlist.mingw32` ，在文件开头添加：
```bash
-Server = https://mirrors.tuna.tsinghua.edu.cn/msys2/mingw/i686
+Server = https://{{ site.host }}/msys2/mingw/i686
```
编辑 `/etc/pacman.d/mirrorlist.mingw64` ，在文件开头添加：
```bash
-Server = https://mirrors.tuna.tsinghua.edu.cn/msys2/mingw/x86_64
+Server = https://{{ site.host }}/msys2/mingw/x86_64
```
编辑 `/etc/pacman.d/mirrorlist.msys` ，在文件开头添加：
```bash
-Server = https://mirrors.tuna.tsinghua.edu.cn/msys2/msys/$arch
+Server = https://{{ site.host }}/msys2/msys/$arch
```
然后执行 `pacman -Sy` 刷新软件包数据即可。
diff --git a/_posts/help/1970-01-01-mysql.md b/_posts/help/1970-01-01-mysql.md
index 94ca6c2..e5a3f50 100644
--- a/_posts/help/1970-01-01-mysql.md
+++ b/_posts/help/1970-01-01-mysql.md
@@ -37,7 +37,7 @@ mirrorid: mysql
{% raw %}
{%endraw%}
@@ -68,35 +68,35 @@ deb https://mirrors.tuna.tsinghua.edu.cn/mysql/apt/{{os_name}} {{release_name}}
{%endraw%}
-ISO安装文件下载：[https://mirrors.tuna.tsinghua.edu.cn/proxmox/iso/](https://mirrors.tuna.tsinghua.edu.cn/proxmox/iso/)
\ No newline at end of file
+ISO安装文件下载：[https://{{ site.host }}/proxmox/iso/](https://{{ site.host }}/proxmox/iso/)
diff --git a/_posts/help/1970-01-01-pybombs.md b/_posts/help/1970-01-01-pybombs.md
index 4c09c8e..2ee6e78 100644
--- a/_posts/help/1970-01-01-pybombs.md
+++ b/_posts/help/1970-01-01-pybombs.md
@@ -22,8 +22,8 @@ PyBOMBS 镜像使用帮助
```bash
sudo pip install pybombs
rm -rf ~/.pybombs
-pybombs recipes add gr-recipes git+https://mirrors.tuna.tsinghua.edu.cn/pybombs/recipes/gr-recipes.git
-pybombs recipes add gr-etcetera git+https://mirrors.tuna.tsinghua.edu.cn/pybombs/recipes/gr-etcetera.git
+pybombs recipes add gr-recipes git+https://{{ site.host }}/pybombs/recipes/gr-recipes.git
+pybombs recipes add gr-etcetera git+https://{{ site.host }}/pybombs/recipes/gr-etcetera.git
mkdir gnuradio-prefix
cd gnuradio-prefix
pybombs prefix init
@@ -41,8 +41,8 @@ pybombs install rtl-sdr hackrf bladeRF gr-osmosdr gr-bluetooth gr-ieee-80211
```bash
pybombs recipes remove gr-recipes
pybombs recipes remove gr-etcetera
-pybombs recipes add gr-recipes git+https://mirrors.tuna.tsinghua.edu.cn/pybombs/recipes/gr-recipes.git
-pybombs recipes add gr-etcetera git+https://mirrors.tuna.tsinghua.edu.cn/pybombs/recipes/gr-etcetera.git
+pybombs recipes add gr-recipes git+https://{{ site.host }}/pybombs/recipes/gr-recipes.git
+pybombs recipes add gr-etcetera git+https://{{ site.host }}/pybombs/recipes/gr-etcetera.git
```
- 本镜像使用 脚本进行构建。
diff --git a/_posts/help/1970-01-01-qemu.git.md b/_posts/help/1970-01-01-qemu.git.md
index a890764..e13cd5d 100644
--- a/_posts/help/1970-01-01-qemu.git.md
+++ b/_posts/help/1970-01-01-qemu.git.md
@@ -9,19 +9,19 @@ mirrorid: qemu.git
如需克隆 QEMU 代码，使用
```
-git clone https://mirrors.tuna.tsinghua.edu.cn/git/qemu.git
+git clone https://{{ site.host }}/git/qemu.git
```
若要将 tuna mirror 加入已有代码库，可在已有仓库中运行
```
-git remote add tuna https://mirrors.tuna.tsinghua.edu.cn/git/qemu.git
+git remote add tuna https://{{ site.host }}/git/qemu.git
```
或运行
```
-git remote set-url origin https://mirrors.tuna.tsinghua.edu.cn/git/qemu.git
+git remote set-url origin https://{{ site.host }}/git/qemu.git
```
将默认上游设置为 TUNA 镜像
diff --git a/_posts/help/1970-01-01-raspbian.md b/_posts/help/1970-01-01-raspbian.md
index bb53f69..74e29dc 100644
--- a/_posts/help/1970-01-01-raspbian.md
+++ b/_posts/help/1970-01-01-raspbian.md
@@ -66,11 +66,11 @@ testing 版本的 7.0/wheezy，所以 Raspbian 不倾向于使用 stable/testing
{% raw %}
{% endraw %}
diff --git a/_posts/help/1970-01-01-repo-ck.md b/_posts/help/1970-01-01-repo-ck.md
index 7d97d0f..2010f0d 100644
--- a/_posts/help/1970-01-01-repo-ck.md
+++ b/_posts/help/1970-01-01-repo-ck.md
@@ -18,7 +18,7 @@ mirrorid: repo-ck
```
[repo-ck]
-Server = https://mirrors.tuna.tsinghua.edu.cn/repo-ck/$arch
+Server = https://{{ site.host }}/repo-ck/$arch
```
再增加 GPG 信任:
diff --git a/_posts/help/1970-01-01-ros.md b/_posts/help/1970-01-01-ros.md
index 47ff171..3837bb9 100644
--- a/_posts/help/1970-01-01-ros.md
+++ b/_posts/help/1970-01-01-ros.md
@@ -31,7 +31,7 @@ mirrorid: ros
{% raw %}
{%endraw%}
@@ -40,4 +40,4 @@ deb https://mirrors.tuna.tsinghua.edu.cn/ros/ubuntu/ {{release_name}} main
```
sudo apt-key adv --keyserver 'hkp://keyserver.ubuntu.com:80' --recv-key C1CF6E31E6BADE8868B172B4F42ED6FBAB17C654
sudo apt update
-```
\ No newline at end of file
+```
diff --git a/_posts/help/1970-01-01-rpmfusion.md b/_posts/help/1970-01-01-rpmfusion.md
index eb7b187..04fd2dd 100644
--- a/_posts/help/1970-01-01-rpmfusion.md
+++ b/_posts/help/1970-01-01-rpmfusion.md
@@ -17,19 +17,19 @@ sudo yum install --nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusi
或者如下直接用 TUNA 镜像中的 rpm 包：
```
-sudo yum install --nogpgcheck https://mirrors.tuna.tsinghua.edu.cn/rpmfusion/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm https://mirrors.tuna.tsinghua.edu.cn/rpmfusion/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm
+sudo yum install --nogpgcheck https://{{ site.host }}/rpmfusion/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm https://{{ site.host }}/rpmfusion/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm
```
注意：没有将当前用户设为管理员的用户，需要将 `sudo CMD` 替换为 `su -c 'CMD'`，并输入 root 密码。
### 修改链接指向 TUNA 镜像
-安装成功后，修改 `/etc/yum.repos.d/` 目录下以 `rpmfusion` 开头，以 `.repo` 结尾的文件。具体而言，需要将文件中的 `baseurl=` 开头的行等号后面链接中的 `http://download1.rpmfusion.org/` 替换为 `https://mirrors.tuna.tsinghua.edu.cn/rpmfusion/`，替换后的文件类似如下：
+安装成功后，修改 `/etc/yum.repos.d/` 目录下以 `rpmfusion` 开头，以 `.repo` 结尾的文件。具体而言，需要将文件中的 `baseurl=` 开头的行等号后面链接中的 `http://download1.rpmfusion.org/` 替换为 `https://{{ site.host }}/rpmfusion/`，替换后的文件类似如下：
```
[rpmfusion-free]
name=RPM Fusion for Fedora $releasever - Free
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/rpmfusion/free/fedora/releases/$releasever/Everything/$basearch/os/
+baseurl=https://{{ site.host }}/rpmfusion/free/fedora/releases/$releasever/Everything/$basearch/os/
mirrorlist=http://mirrors.rpmfusion.org/mirrorlist?repo=free-fedora-$releasever&arch=$basearch
enabled=1
metadata_expire=7d
@@ -46,7 +46,7 @@ gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-$releasever-$ba
[rpmfusion-free-source]
name=RPM Fusion for Fedora $releasever - Free - Source
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/rpmfusion/free/fedora/releases/$releasever/Everything/source/SRPMS/
+baseurl=https://{{ site.host }}/rpmfusion/free/fedora/releases/$releasever/Everything/source/SRPMS/
mirrorlist=http://mirrors.rpmfusion.org/mirrorlist?repo=free-fedora-source-$releasever&arch=$basearch
enabled=0
metadata_expire=7d
diff --git a/_posts/help/1970-01-01-stackage.md b/_posts/help/1970-01-01-stackage.md
index e34e724..b40eeda 100644
--- a/_posts/help/1970-01-01-stackage.md
+++ b/_posts/help/1970-01-01-stackage.md
@@ -6,16 +6,16 @@ mirrorid: stackage
## stackage 镜像使用帮助
-本镜像推荐与 TUNA 的 [Hackage 镜像](https://mirrors.tuna.tsinghua.edu.cn/help/hackage/)配合使用。
+本镜像推荐与 TUNA 的 [Hackage 镜像](https://{{ site.host }}/help/hackage/)配合使用。
### stack >= v2.1.1
修改`~/.stack/config.yaml`（在 Windows 下是 `%APPDATA%\stack\config.yaml`）, 加上:
```yaml
-setup-info: "http://mirrors.tuna.tsinghua.edu.cn/stackage/stack-setup.yaml"
+setup-info: "http://{{ site.host }}/stackage/stack-setup.yaml"
urls:
- latest-snapshot: http://mirrors.tuna.tsinghua.edu.cn/stackage/snapshots.json
+ latest-snapshot: http://{{ site.host }}/stackage/snapshots.json
```
### stack < v2.1.1
@@ -23,9 +23,9 @@ urls:
修改`~/.stack/config.yaml`（在 Windows 下是 `%APPDATA%\stack\config.yaml`）, 加上:
```yaml
-setup-info: "http://mirrors.tuna.tsinghua.edu.cn/stackage/stack-setup.yaml"
+setup-info: "http://{{ site.host }}/stackage/stack-setup.yaml"
urls:
- latest-snapshot: http://mirrors.tuna.tsinghua.edu.cn/stackage/snapshots.json
- lts-build-plans: http://mirrors.tuna.tsinghua.edu.cn/stackage/lts-haskell/
- nightly-build-plans: http://mirrors.tuna.tsinghua.edu.cn/stackage/stackage-nightly/
+ latest-snapshot: http://{{ site.host }}/stackage/snapshots.json
+ lts-build-plans: http://{{ site.host }}/stackage/lts-haskell/
+ nightly-build-plans: http://{{ site.host }}/stackage/stackage-nightly/
```
diff --git a/_posts/help/1970-01-01-termux.md b/_posts/help/1970-01-01-termux.md
index 879dfa7..71fdc98 100644
--- a/_posts/help/1970-01-01-termux.md
+++ b/_posts/help/1970-01-01-termux.md
@@ -33,9 +33,9 @@ Termux 是运行在 Android 上的 terminal。不需要root，运行于内部存
使用如下命令自动替换官方源为 TUNA 镜像源
``` bash
-sed -i 's@^\(deb.*stable main\)$@#\1\ndeb https://mirrors.tuna.tsinghua.edu.cn/termux/termux-packages-24 stable main@' $PREFIX/etc/apt/sources.list
-sed -i 's@^\(deb.*games stable\)$@#\1\ndeb https://mirrors.tuna.tsinghua.edu.cn/termux/game-packages-24 games stable@' $PREFIX/etc/apt/sources.list.d/game.list
-sed -i 's@^\(deb.*science stable\)$@#\1\ndeb https://mirrors.tuna.tsinghua.edu.cn/termux/science-packages-24 science stable@' $PREFIX/etc/apt/sources.list.d/science.list
+sed -i 's@^\(deb.*stable main\)$@#\1\ndeb https://{{ site.host }}/termux/termux-packages-24 stable main@' $PREFIX/etc/apt/sources.list
+sed -i 's@^\(deb.*games stable\)$@#\1\ndeb https://{{ site.host }}/termux/game-packages-24 games stable@' $PREFIX/etc/apt/sources.list.d/game.list
+sed -i 's@^\(deb.*science stable\)$@#\1\ndeb https://{{ site.host }}/termux/science-packages-24 science stable@' $PREFIX/etc/apt/sources.list.d/science.list
apt update && apt upgrade
```
@@ -45,21 +45,21 @@ apt update && apt upgrade
```
# The termux repository mirror from TUNA:
-deb https://mirrors.tuna.tsinghua.edu.cn/termux/termux-packages-24 stable main
+deb https://{{ site.host }}/termux/termux-packages-24 stable main
```
编辑 `$PREFIX/etc/apt/sources.list.d/science.list` 修改为如下内容
```
# The termux repository mirror from TUNA:
-deb https://mirrors.tuna.tsinghua.edu.cn/termux/science-packages-24 science stable
+deb https://{{ site.host }}/termux/science-packages-24 science stable
```
编辑 `$PREFIX/etc/apt/sources.list.d/game.list` 修改为如下内容
```
# The termux repository mirror from TUNA:
-deb https://mirrors.tuna.tsinghua.edu.cn/termux/game-packages-24 games stable
+deb https://{{ site.host }}/termux/game-packages-24 games stable
```
请使用内置或安装在 Termux 里的文本编辑器，例如 `vi` / `vim` / `nano` 等，**不要使用 RE 管理器等其他具有 ROOT 权限的外部 APP** 来修改 Termux 的文件
@@ -67,9 +67,9 @@ deb https://mirrors.tuna.tsinghua.edu.cn/termux/game-packages-24 games stable
镜像站还提供了如下社区维护的源，如需使用请自行添加：
-- https://mirrors.tuna.tsinghua.edu.cn/termux/x11-packages
-- https://mirrors.tuna.tsinghua.edu.cn/termux/unstable-packages
-- https://mirrors.tuna.tsinghua.edu.cn/termux/termux-root-packages-24
+- https://{{ site.host }}/termux/x11-packages
+- https://{{ site.host }}/termux/unstable-packages
+- https://{{ site.host }}/termux/termux-root-packages-24
### 警告
diff --git a/_posts/help/1970-01-01-ubuntu.md b/_posts/help/1970-01-01-ubuntu.md
index 1d55cd0..ce44fdf 100644
--- a/_posts/help/1970-01-01-ubuntu.md
+++ b/_posts/help/1970-01-01-ubuntu.md
@@ -35,18 +35,18 @@ TUNA 的软件源镜像。
{% raw %}
{% endraw %}
diff --git a/_posts/help/1970-01-01-voidlinux.md b/_posts/help/1970-01-01-voidlinux.md
index 5df25a5..dbdd1a8 100644
--- a/_posts/help/1970-01-01-voidlinux.md
+++ b/_posts/help/1970-01-01-voidlinux.md
@@ -11,9 +11,9 @@ mirrorid: voidlinux
```
# mkdir -p /etc/xbps.d
# cp /usr/share/xbps.d/*-repository-*.conf /etc/xbps.d/
-# sed -i 's|https://alpha.de.repo.voidlinux.org|https://mirrors.tuna.tsinghua.edu.cn/voidlinux|g' /etc/xbps.d/*-repository-*.conf
+# sed -i 's|https://alpha.de.repo.voidlinux.org|https://{{ site.host }}/voidlinux|g' /etc/xbps.d/*-repository-*.conf
```
之后可用 `xbps-query -L` 检查是否正确替换。
-参考[官方教程](https://docs.voidlinux.org/xbps/repositories/mirrors/changing.html)。
\ No newline at end of file
+参考[官方教程](https://docs.voidlinux.org/xbps/repositories/mirrors/changing.html)。
diff --git a/_posts/help/2007-08-31-alpine.md b/_posts/help/2007-08-31-alpine.md
index f6ed489..6c2518a 100644
--- a/_posts/help/2007-08-31-alpine.md
+++ b/_posts/help/2007-08-31-alpine.md
@@ -13,5 +13,5 @@ Alpine Linux 是一个面向安全，轻量级的基于musl libc与busybox项目
在终端输入以下命令以替换TUNA镜像源：
```
-sed -i 's/dl-cdn.alpinelinux.org/mirrors.tuna.tsinghua.edu.cn/g' /etc/apk/repositories
+sed -i 's/dl-cdn.alpinelinux.org/{{ site.host }}/g' /etc/apk/repositories
```
diff --git a/_posts/help/2016-06-19-virtualbox.md b/_posts/help/2016-06-19-virtualbox.md
index 98e9e72..a9994f6 100644
--- a/_posts/help/2016-06-19-virtualbox.md
+++ b/_posts/help/2016-06-19-virtualbox.md
@@ -10,12 +10,12 @@ mirrorid: virtualbox
## Microsoft Windows
-[点击下载 Windows 最新版](https://mirrors.tuna.tsinghua.edu.cn/virtualbox/virtualbox-Win-latest.exe)
+[点击下载 Windows 最新版](https://{{ site.host }}/virtualbox/virtualbox-Win-latest.exe)
## Macintosh OS X
-[点击下载 OS X 最新版](https://mirrors.tuna.tsinghua.edu.cn/virtualbox/virtualbox-osx-latest.dmg)
+[点击下载 OS X 最新版](https://{{ site.host }}/virtualbox/virtualbox-osx-latest.dmg)
# Linux
@@ -76,7 +76,7 @@ wget -q https://www.virtualbox.org/download/oracle_vbox.asc -O- | sudo apt-key a
{% raw %}
{% endraw %}
@@ -95,7 +95,7 @@ sudo apt-get install virtualbox-5.0
```
[virtualbox]
name=Virtualbox Repository
-baseurl=https://mirrors.tuna.tsinghua.edu.cn/virtualbox/rpm/el$releasever/
+baseurl=https://{{ site.host }}/virtualbox/rpm/el$releasever/
gpgcheck=0
enabled=1
```
diff --git a/_posts/help/2016-06-21-repoforge.md b/_posts/help/2016-06-21-repoforge.md
index 1eb3b59..d563383 100644
--- a/_posts/help/2016-06-21-repoforge.md
+++ b/_posts/help/2016-06-21-repoforge.md
@@ -13,7 +13,7 @@ mirrorid: repoforge
1. 运行 `cat /etc/redhat-release` 获取 EL 版本号（如 EL6, EL7 等）
2. 向系统中添加 Repoforge 的 GPG 公钥：
```
-rpm --import https://mirrors.tuna.tsinghua.edu.cn/repoforge/RPM-GPG-KEY.dag.txt
+rpm --import https://{{ site.host }}/repoforge/RPM-GPG-KEY.dag.txt
```
3. 运行下列命令：
@@ -35,7 +35,7 @@ rpm --import https://mirrors.tuna.tsinghua.edu.cn/repoforge/RPM-GPG-KEY.dag.txt
sudo cat > /etc/yum.repos.d/rpmforge.repo << EOF
[rpmforge]
name = RHEL $releasever - RPMforge.net - dag
-baseurl = https://mirrors.tuna.tsinghua.edu.cn/repoforge/redhat/{{release_name}}/en/$basearch/rpmforge
+baseurl = https://{{ site.host }}/repoforge/redhat/{{release_name}}/en/$basearch/rpmforge
mirrorlist = http://mirrorlist.repoforge.org/{{release_name}}/mirrors-rpmforge
enabled = 1
protect = 0
@@ -44,7 +44,7 @@ gpgcheck = 1
[rpmforge-extras]
name = RHEL $releasever - RPMforge.net - extras
-baseurl = https://mirrors.tuna.tsinghua.edu.cn/repoforge/redhat/{{release_name}}/en/$basearch/extras
+baseurl = https://{{ site.host }}/repoforge/redhat/{{release_name}}/en/$basearch/extras
mirrorlist = http://mirrorlist.repoforge.org/{{release_name}}/mirrors-rpmforge-extras
enabled = 0
protect = 0
@@ -53,7 +53,7 @@ gpgcheck = 1
[rpmforge-testing]
name = RHEL $releasever - RPMforge.net - testing
-baseurl = https://mirrors.tuna.tsinghua.edu.cn/repoforge/redhat/{{release_name}}/en/$basearch/testing
+baseurl = https://{{ site.host }}/repoforge/redhat/{{release_name}}/en/$basearch/testing
mirrorlist = http://mirrorlist.repoforge.org/{{release_name}}/mirrors-rpmforge-testing
enabled = 0
protect = 0
diff --git a/_posts/help/2016-08-18-rubygems.md b/_posts/help/2016-08-18-rubygems.md
index 5db2c92..b15a19d 100644
--- a/_posts/help/2016-08-18-rubygems.md
+++ b/_posts/help/2016-08-18-rubygems.md
@@ -12,19 +12,19 @@ mirrorid: rubygems
```bash
# 添加 TUNA 源并移除默认源
-gem sources --add https://mirrors.tuna.tsinghua.edu.cn/rubygems/ --remove https://rubygems.org/
+gem sources --add https://{{ site.host }}/rubygems/ --remove https://rubygems.org/
# 列出已有源
gem sources -l
# 应该只有 TUNA 一个
```
-或者，编辑 `~/.gemrc`，将 `https://mirrors.tuna.tsinghua.edu.cn/rubygems/` 加到 `sources` 字段。
+或者，编辑 `~/.gemrc`，将 `https://{{ site.host }}/rubygems/` 加到 `sources` 字段。
## `bundler`
使用以下命令替换 bundler 默认源
```bash
-bundle config mirror.https://rubygems.org https://mirrors.tuna.tsinghua.edu.cn/rubygems
+bundle config mirror.https://rubygems.org https://{{ site.host }}/rubygems
```
官方文档： http://bundler.io/v1.16/man/bundle-config.1.html#MIRRORS-OF-GEM-SOURCES
diff --git a/_posts/help/2017-01-12-bioconductor.md b/_posts/help/2017-01-12-bioconductor.md
index 5c39117..e8375a3 100644
--- a/_posts/help/2017-01-12-bioconductor.md
+++ b/_posts/help/2017-01-12-bioconductor.md
@@ -13,7 +13,7 @@ Bioconductor 镜像源配置文件之一是 `.Rprofile` (linux 下位于 `~/.Rpr
在文末添加如下语句:
```
-options(BioC_mirror="https://mirrors.tuna.tsinghua.edu.cn/bioconductor")
+options(BioC_mirror="https://{{ site.host }}/bioconductor")
```
打开R即可使用该 Bioconductor 镜像源安装 Bioconductor 软件包。
diff --git a/_posts/help/2017-01-17-CRAN.md b/_posts/help/2017-01-17-CRAN.md
index d6bda33..f4b2597 100644
--- a/_posts/help/2017-01-17-CRAN.md
+++ b/_posts/help/2017-01-17-CRAN.md
@@ -13,7 +13,7 @@ CRAN 镜像使用帮助
在文末添加如下语句:
```
-options("repos" = c(CRAN="https://mirrors.tuna.tsinghua.edu.cn/CRAN/"))
+options("repos" = c(CRAN="https://{{ site.host }}/CRAN/"))
```
打开 R 即可使用该 CRAN 镜像源安装 R 软件包。
diff --git a/_posts/help/2017-05-28-llvm.md b/_posts/help/2017-05-28-llvm.md
index a58a4c3..e9f5c1c 100644
--- a/_posts/help/2017-05-28-llvm.md
+++ b/_posts/help/2017-05-28-llvm.md
@@ -15,7 +15,7 @@ http://llvm.org/git/{llvm,clang,libcxx,lldb,clang-tools-extra,polly,zorg,compile
使用方法：
```
-git clone https://mirrors.tuna.tsinghua.edu.cn/git/llvm/{reponame}.git
+git clone https://{{ site.host }}/git/llvm/{reponame}.git
```
其中`{reponame}`为上述的仓库名称之一。请注意：由于仓库体积均较大，执行`git clone`可能需要较长时间，并且没有进度提示，请耐心等候。
@@ -23,13 +23,13 @@ git clone https://mirrors.tuna.tsinghua.edu.cn/git/llvm/{reponame}.git
若要将 TUNA mirror 加入已有代码库，可在已有仓库中运行
```
-git remote add tuna https://mirrors.tuna.tsinghua.edu.cn/git/llvm/{reponame}.git
+git remote add tuna https://{{ site.host }}/git/llvm/{reponame}.git
```
或运行
```
-git remote set-url origin https://mirrors.tuna.tsinghua.edu.cn/git/llvm/{reponame}.git
+git remote set-url origin https://{{ site.host }}/git/llvm/{reponame}.git
```
将默认上游设置为 TUNA 镜像
diff --git a/_posts/help/2017-08-10-CTAN.md b/_posts/help/2017-08-10-CTAN.md
index b14fe48..bec94bb 100644
--- a/_posts/help/2017-08-10-CTAN.md
+++ b/_posts/help/2017-08-10-CTAN.md
@@ -12,7 +12,7 @@ CTAN 镜像使用帮助
在命令行中执行
```
-tlmgr option repository https://mirrors.tuna.tsinghua.edu.cn/CTAN/systems/texlive/tlnet
+tlmgr option repository https://{{ site.host }}/CTAN/systems/texlive/tlnet
```
即可永久更改镜像源。
@@ -20,7 +20,7 @@ tlmgr option repository https://mirrors.tuna.tsinghua.edu.cn/CTAN/systems/texliv
如果只需要临时切换，可以用如下命令：
```
-tlmgr update --all --repository https://mirrors.tuna.tsinghua.edu.cn/CTAN/systems/texlive/tlnet
+tlmgr update --all --repository https://{{ site.host }}/CTAN/systems/texlive/tlnet
```
其中的 `update --all` 指令可根据需要修改。
diff --git a/_posts/help/2017-11-28-openthos-src.md b/_posts/help/2017-11-28-openthos-src.md
index 9e768ff..6cd7644 100644
--- a/_posts/help/2017-11-28-openthos-src.md
+++ b/_posts/help/2017-11-28-openthos-src.md
@@ -6,7 +6,7 @@ mirrorid: openthos-src
# OpenTHOS 源代码镜像使用帮助
-**注意: 本镜像是 OpenTHOS 源代码的镜像，如果是希望下载 OpenTHOS 的安装镜像，请访问 。**
+**注意: 本镜像是 OpenTHOS 源代码的镜像，如果是希望下载 OpenTHOS 的安装镜像，请访问 。**
OpenTHOS 是基于 Android x86 的一套具有自主知识产权的开源桌面操作系统。其源代码获取方式类似于 AOSP，
-但需要将上游地址指向 `https://mirrors.tuna.tsinghua.edu.cn/git/openthos-src/manifest`。
+但需要将上游地址指向 `https://{{ site.host }}/git/openthos-src/manifest`。
diff --git a/_posts/help/2017-12-29-gentoo-portage.md b/_posts/help/2017-12-29-gentoo-portage.md
index 15c9bdf..de5a6d4 100644
--- a/_posts/help/2017-12-29-gentoo-portage.md
+++ b/_posts/help/2017-12-29-gentoo-portage.md
@@ -11,7 +11,7 @@ mirrorid: gentoo-portage
在 `/etc/portage/make.conf` 中加入：
```
-GENTOO_MIRRORS="https://mirrors.tuna.tsinghua.edu.cn/gentoo"
+GENTOO_MIRRORS="https://{{ site.host }}/gentoo"
```
执行 `emerge --sync` 或者 `eix-sync` 进行更新。
diff --git a/_posts/help/2019-02-15-grafana.md b/_posts/help/2019-02-15-grafana.md
index c87636b..02c52f3 100644
--- a/_posts/help/2019-02-15-grafana.md
+++ b/_posts/help/2019-02-15-grafana.md
@@ -47,7 +47,7 @@ sudo apt-get install grafana
{% raw %}
{%endraw%}
@@ -83,7 +83,7 @@ sudo yum install grafana